capri_wrenches_icon  RATCHETING WRENCHES

6-Point Anti-Slip Groove

These wrenches are specifically designed to provide maximum hold and spread the pressure on a nut evenly so you will have no worry of rounding even the most stubborn nut.

True Single-Pawl 100-Tooth Gear

We went beyond the average 72 teeth count to give you the finest window of room to work with when trying to reach those tight spaces. Now only needing a 3.6-degree turn!

12-Point WaveDrive (TM)

Achieved through our expert engineering and precise craftsmanship, our unparalleled true 100-tooth ratchet gear gives you just 3.6 degrees of swing arc with an ultra smooth ratcheting mechanism that’s a joy to use.

Two set in both Imperial
and Metric system

Metric:
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm

Standard:
1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 inch

Packaging Choice:
Wrench Rack, Roll-up Pouch, The Mechanics Tray

Model# CP11500, CP11500RK, CP11500MT
Experience our true 100-tooth ratcheting wrenches in the tightest of spaces. With just 3.6 degrees of swing arc, they will make your job a whole lot easier. Our true single-pawl 100-tooth ratchet gear is achievable only through expert engineering and precise craftsmanship. Its unparalleled smooth ratcheting mechanism makes it a joy to use. All of these components are engineered to fit in a slim profile to make these the go-to wrench for pros

• 12-point WaveDrive box end transfers torque uniformly and prevents damaging and rounding of the bolt. 0 degree offset on the box end gives you maximum clearance. Integrated steel color ring makes it easy to identify between SAE (red) and metric (blue) sizes

• Open end features 6-point anti-slip groove that grips on the bolt and prevents slippage while you work. The open end is tipped at a 15-degree angle. Useful especially in tight spots, after each 15-degree turn, flip the wrench over to quickly engage the fastener again

• Flawless SmartKrome plating, achieved by thorough polishing and careful application of chrome protective plating, ensures durability and corrosion resistance

Three different configurations:
Metric Sizes: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
CP11500: Rollup Pouch
CP11500RK: Wrench Rack
CP11500MT: Fitting the Mechanics Tray Tool Chest System

Standard Sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 inch
CP11600: Rollup Pouch
CP11600RK: Wrench Rack
CP11600MT: Fitting the Mechanics Tray Tool Chest System