TORQUE LIMITING EXTENSION BARS
Start with 20% lower
Select a torque sticks rated for approx 20% lower of the final torque specified. Use an air impact wrench to tighten the lug nuts. When the torque limit is reached, it flexes and stops.
The last and most important step is to finish off with a torque wrench. Set the torque wrench with the specific torque and finish off until you can hear a click from the torque wrench
We believe in our products enough to back them up with a lifetime warranty to give you more confidence and peace of mind about your purchase.
• Use these torque extension bars with an impact wrench to ensure consistently accurate torque for your fasteners
• Five 1/2-in extension bars, made of chrome-molybdenum steel, 8-in long
• Color coded torque extension bars: 65, 80, 100, 120, 140 ft-lbs (90, 110, 135, 160, 190 nm)
• Includes carrying/storage case
• Lifetime warranty
This set of torque extension bars is a must if you use an impact wrench for tightening fasteners. This ensures that you achieve consistent torque accuracy on each and every piece. Included are 5 Chrome Molybdenum torque extension bars, color coded and ranging from 65 ft-lbs to 140 ft-lbs. This set also includes a customized carrying and storage case as well as a lifetime warranty.
|Model No.||Drive (in.)||Content||l (in.)||wt (lbs)|
|30083||1/2||65 ft-lbs (Green)
80 ft-lbs (Yellow)
100 ft-lbs (Blue)
120 ft-lbs (Gray)
140 ft-lbs (White)